Keo dán nhanh cao su AFINITI RTA
Category:

AFINITI RTA – rubber toughened with instant adhesive

  • AFINITICA® RTA is rubber toughened instant adhesive for professional use
  • Bonding edges, seams of components like smartphones.
  • Impact and peel resistance.
  • Excellent strength.
  • Instant adhesion.
Tag:
LIÊN HỆ BÁO GIÁ

RUBBER TOUGHENED INSTANT ADHESIVE FOR PROFESSIONAL USE

AFINITICA® RTA includes rubber toughened particles which increase the viscosity and offer high peel strength, impacts and vibration resistance. An ideal adhesive for applications where a high resistance in a short time is required. RTA bonds all type of materials including metals, plastics and rubbers.

Adhesive Technology Cyanoacrylate

BASE

 Ethyl Cyanoacrylate

VISCOSITY

1.000 – 3.000 cP

COLOUR

Transparent

GAP FILLING CAPACITY

Up to 20 mm

OPEN TIME

Up to 2 hours, depending on substrate

FEATURES

RUBBER TOUGHENED INSTANT ADHESIVE FOR PROFESSIONAL USE RTA

  • Instant adhesion.
  • Highbonding strength.
  • Peel and impact resistant
  • Withstands vibrations
  • Flexible
  • Bonds a large range of materials.
  • Transparent and easy to use.

TYPICAL APPLICATIONS

  • General bonding of close parts.
  • Quick repairs on any material.
  • Bonding porous materials such as wood and leather.
  • Applications that require resistance to impactor peeling.
  • Union of parts subjected to bending loads.

Tensile Sheer Strength

Tensile sheer strength will depend on the substrate. The table below shows the shear strength of different substrates according to ISO 4587. Cure in 24h at 25oC.

Strength (N/mm2)
ABS 3–4
Polycarbonate 8 – 9
PVC 4-6
Aluminium A5754 5 – 10
Steel 14 – 17
Stainless Steel 12 – 15

 

Shear strength

Substrate FIXTURE TIME (second) SHEAR STRENGTH (24 h, kg/cm2)
ABS 15-40 30-40
Polycarbonate 20-50 80-90
Aluminium A5754 5-10 50-100
Steel 10-20 140-170

Usage Instructions

  • Ensure that the bonding surfaces are clean, dry, and free from grease or oil before applying the adhesive.
  • Apply the adhesive to one of the surfaces. Avoid using items like paper towels or brushes to spread the adhesive.
  • Assemble the parts within seconds. The parts must be accurately positioned as the curing time is short, allowing little opportunity for adjustment.
  • The bonds must be held stationary or clamped until the adhesive sets.
  • Allow the product to reach full strength before subjecting it to any loads (typically 24 to 72 hours after assembly, depending on the bond gap, materials, and surrounding environmental conditions).

Purchase AFINITICA® RTA

  • ☎️ Hotline: 0565 33 68 79
  • ✉️ Email: hittajsc@hitta.vn

 

5/5 - (2 votes)

Related products

Shop All